Pump Specs
Back to Simple Pump page.

Simple Pumpô is made completely from lead-free, CNC-machined stainless steel and aluminum components. (Aluminum is never in contact with water.)
All components are Safe Drinking Water Act compliant. Simple Pumpô is designed with very few points of wear: the double u-cup seals on the piston, the rod seal in the pump head, and the rod guides in the drop pipe.

With normal use, your maintenance expenses average only $5 per year!

Part Material
Pump assembly CNC-machined stainless steel
Pump head CNC-machined stainless steel
Pump cylinder CNC-machined stainless steel
Ball seats CNC-machined stainless steel
Sucker rods High-tensile fiberglass with fused stainless steel ends
Drop pipe Polyvinyl Chloride (PVC), Schedule 80
Pump lever handle Aircraft-grade T6061 solid aluminum
Rod guide HDPE (high density polyethylene)
Pistons Machined PVC
Well caps

Available in 2", 4", 5", 6" and 7/8" diameters. (Details below.)

Sucker Rods

Standard sucker rods are manufactured to a 108" length. Rods also available in 54" and 27" lengths.

Drop Pipe

Kit comes standard with a 1/16" diameter weep drilled into the sidewall of the PVC pipe, 48" below the top. In no-frost installations, the weep hole can be deleted at no charge.

12-volt DC Motor Extension Kit

Motor can be powered by a solar panel or battery. In this mode, Simple Pump can pump up to 2 gallons per minute at depths up to 200 feet.

 

Details of Simple Pump Well Cap Options

2" diameter has 1 3/4" split flange port for the Simple Pump only

4" diameter has 1 3/4" split flange port for the Simple Pump, 1" female NPT port for 220VAC supply to a submersible and a 1 3/4" smooth wall port for submersible pressure line.

5" diameter has 1 3/4" split flange port for the Simple Pump, 1" female NPT port for 220VAC supply to a submersible and a 1 3/4" smooth wall port for submersible pressure line.

6" diameter has 1 3/4" split flange port for the Simple Pump, 1" female NPT port for 220VAC supply to a submersible and a 1 3/4" smooth wall port for submersible pressure line.

6" WTCC Trega is certified, gasketed, watertight, vented, screened with Simple Pump Boss. Must be used with submersible using a pitless adaptor.

7/8" diameter has 1 3/4" split flange port for the Simple Pump, 1" female NPT port for 220VAC supply to a submersible and a 1 3/4" smooth wall port for submersible pressure line.