EVENT HORIZON
SOLAR & WIND
(269) 795.5285 solarpower@hughes.net
Advanced Energy Group
authorized dealer
|
|
| Site Index Basics Sizing Resources Equipment Contact Us Opportunities |
|
|||||||||||||||||||||||||||||||||||||||||
| Note: All prices and specifications are subject to change without notice. | |||||||||||||||||||||||||||||||||||||||||
| SW-SERIES | Top | |||||||||
The SW Series is the most advanced, easy-to-use sine wave power conversion
product available in the world today. Ideal for use in primary (off grid), net
metering (grid tie) and backup power applications, the SW Series sets the
standard for high performance and power reliability with over 30,000 units in
service worldwide. It is fully compatible with grid power, generators, and
renewable energy systems. The SW Series is Listed by UL to UL 1741 - 1999, to
CSA C22.2 No. 107.1-95, and is IEEE 929 compliant.
|
||||||||||
| Model | Description | List Price | ||||||||
| North American Applications | ||||||||||
| SW4024 | 4.0 kva - 24 vdc input, 120 vac 60 Hz output with 120 amp charger and 60 amp AC transfer relay | $3495.00 | ||||||||
| SW4048 | 4.0 kva - 48 vdc input, 120 vac 60 Hz output with 60 amp charger and 60 amp AC transfer relay | $3495.00 | ||||||||
| SW5548 | 5.5 kva - 48 vdc input, 120 vac 60 Hz output with 70 amp charger and 60 amp AC transfer relay | $3995.00 | ||||||||
| European Applications | ||||||||||
| SW3024E | 3.3 kva - 24 vdc input, 230 vac 50 Hz output with 100 amp charger and 30 amp AC transfer relay | $3495.00 | ||||||||
| SW3048E | 3.3 kva - 48 vdc input, 230 vac 50 Hz output with 50 amp charger and 30 amp AC transfer relay | $3495.00 | ||||||||
| SW4548E | 4.5 kva - 48 vdc input, 230 vac 50 Hz output with 60 amp charger and 30 amp AC transfer relay | $3995.00 | ||||||||
| Japanese Applications | ||||||||||
| SW3024J | 3.3 kva - 24 vdc input, 105 vac 50 Hz output with 100 amp charger and 60 amp AC transfer relay | $3495.00 | ||||||||
| SW3048J | 3.3 kva-48 vdc input 105 vac 50 Hz output with 50 amp charger and 60 amp AC transfer relay | $3495.00 | ||||||||
| SW4024K | 4.0 kva - 24 vdc input, 105 vac 60 Hz output with 120 amp charger and 60 amp AC transfer relay | $3495.00 | ||||||||
| SW5048K | 5.0 kva - 48 vdc input, 105 vac 60 Hz output with 60 amp charger and 60 amp AC transfer relay | $3995.00 | ||||||||
| Peru and Philippines Applications | ||||||||||
| SW4024W | 4.0 kva - 24 vdc input, 220 vac (2 wire) 60 Hz output with 120 amp charger and 30 amp AC transfer relay | $3495.00 | ||||||||
| Display | ||||||||||
| SW-D | Display SW Series inverter (non-operational) for showroom (price not discountable) | $175.00 | ||||||||
| PS Series | Top | |||||||||
The PS Series is based on the SW Series and is an excellent entry level sine
wave inverter/charger. It has a three-stage battery charger and automatic AC
transfer relay, is UL Listed and responds to all of your stand-alone, backup
power applications. With the optional remote control, all of the SW Series
programming options and settings are accessible.
|
||||||||||
| Model | Description | List Price | ||||||||
| North American Applications | ||||||||||
| PS2512 | 2.5 kVA - 12 VDC input, 120 vac 60 Hz output with 130 amp charger and 30 or 50 amp selectable AC transfer relay | $2,165.00 | ||||||||
| PS2524 | 2.5 kVA - 24 VDC input, 120 VAC 60 Hz output with 65 amp charger and 30 or 50 amp selectable AC transfer relay. | $2,165.00 | ||||||||
| European Applications | ||||||||||
| PS2212E | 2.2 kVA - 12 VDC input, 230 vac 50 Hz output with 100 amp charger and 15 or 30 amp selectable AC transfer relay | $2,165.00 | ||||||||
| PS2524E | 2.5 kVA - 24 VDC input, 230 VAC 50 Hz output with 65 amp charger and 15 or 30 amp selectable AC transfer relay. | $2,165.00 | ||||||||
| Display | ||||||||||
| PS-D | Display PS Series inverter (non-operational) for showroom (price not discountable) | $135.00 | ||||||||
| SW & PS Series Accessories | Top | |||||||||
| Model | Description | List Price | ||||||||
| GSM | Gen Start Module - allows auto generator start with the PS Series inverter | $159.00 | ||||||||
| ALM | Aux Load Module - provides voltage controlled relays with the PS Series inverter | $159.00 | ||||||||
| SWCA |
Sine wave communications adapter allows PC connection and monitoring of up to
eight SW or PS Series inverters - includes adapter, DOS based software, 50' (16
m) of cable and
DB9 connector |
$175.00 | ||||||||
| SWRC | Full function remote control with LCD display for all SW and PS Series inverters. 25' (8 m) cable standard | $295.00 | ||||||||
| SWRC/50ft | As above with 50' (16 m) cable (specify /50 when ordering) | $329.00 | ||||||||
| SWI/PAR | Sine wave paralleling kit - connects two identical SW & PS inverters together for twice the output power at the same voltage (North America only) | $345.00 | ||||||||
| SWI/PAR/E | Same as above for "E" & "W" version inverters | $345.00 | ||||||||
| SWI | Series stacking interface for two identical SW and PS inverters, provides 120/240 VAC, 3 wire 240 VAC, doubles output (not for use with "E" & "W" models) | $45.00 | ||||||||
| SWCB | Conduit box for SW Series - fits on the DC end of the inverter (1/2", 3/4" and 2" knockouts) - adds 6" (15 cm) | $94.00 | ||||||||
| PSCB | Conduit box for PS Series - fits on the DC end of the inverter (1/2", 3/4" and 2" knockouts) - adds 6" (15 cm) | $94.00 | ||||||||
| SUN TIE XR | Top | |||||||||
The UL listed, high frequency Sun Tie XR Series inverter is designed to be the
link between your solar array and the utility. With Sunsweep maximum power
point tracking (MPPT), LCD user display, combined AC/DC surge protection, and DC
and AC input/output breakers, the Sun Tie XR sets the standard for fast, easy,
low cost installation. UL Listed to UL 1741 - 1999 and cUL Listed to CSA C22.2
No 107.1-95. Not designed for use with batteries.
|
||||||||||
| Model | Description | List Price | ||||||||
| STXR2500 | 2.5 kVA - 42-85 VDC input, 240 VAC 60 Hz output, includes six circuit combiner board, PVGFP | $2759.00 | ||||||||
| STXR2000 | 2.0 kVA - 42-85 VDC input, 240 VAC 60 Hz output | $2259.00 | ||||||||
| STXR1500 | 1.5 kVA - 42-85 VDC input, 240 VAC 60 Hz output, includes six circuit combiner board, PVGFP | $2239.00 | ||||||||
| STXR1000 | 1.0 kVA - 42-85 VDC input, 240 VAC 60 Hz output | $1849.00 | ||||||||
| STRS | Protective rain shield, required for installation outdoors (shipped separately) | $125.00 | ||||||||
| STRM | Remote kilowatt hour meter for the Sun Tie XR, with kilowatt hour history | $179.00 | ||||||||
| Display | ||||||||||
| ST-D | Display ST Series inverter (non operational) for showroom (price not discountable) | $175.00 | ||||||||
| PV SERIES | Top | |||||||||
The PV Series is ideal for commercial or small utility scale solar
installations. Designed for high voltage arrays and three-phase industrial power
in 10, 15 and 20 kW versions. This product is intended to bring the advantages
of standard design and prequalification of UL and IEEE requirements to the
industrial system level, reducing system design, installation, and site
certification costs. The PV Series includes automatic maximum power point
tracking and a wide variety of custom definable parameters and communication
options via a standard user interface. It is intended for installation by PV
contractors with utility or industrial scale experience. Not designed for use
with batteries.
|
||||||||||
| Model & Description | List Price | |||||||||
| Grid Tie Photovoltaic Inverter - 300 - 480 VDC input, 120/208 VAC three-phase output - 5, 10 and 15 kW models | PV price and accessory list available to PV contractors | |||||||||
| DR-SERIES | Top | |||||||||
The DR Series inverter is a robust, proven performer designed for remote, medium
sized, off grid and utility backup systems in both residential and commercial
applications. This modified sine wave inverter comes with a three-stage battery
charger and automatic AC transfer relay.
|
||||||||||
| Model | Description | List Price | ||||||||
| North American Applications | ||||||||||
| DR1512 | 1.5 kva 12vdc input 120vac 60Hz output with 70 amp charger and 30 amp AC transfer relay. | $1029.00 | ||||||||
| DR1524 | 1.5 kva 24vdc input 120vac 60Hz output with 35 amp charger and 30 amp AC transfer relay. | $979.00 | ||||||||
| DR2412 | 2.4 kva 12vdc input 120vac 60Hz output with 120 amp charger and 30 amp AC transfer relay. | $1395.00 | ||||||||
| DR2424 | 2.4 kva 24vdc input 120vac 60Hz output with 70 amp charger and 30 amp AC transfer relay. | $1395.00 | ||||||||
| DR3624 | 3.6 kva 24vdc input 120vac 60Hz output with 70 amp charger and 30 amp AC transfer relay. | $1595.00 | ||||||||
| European Applications | ||||||||||
| DR1512E | 1.5 kva 12vdc input 230vac 50Hz output with 70 amp charger and 15 amp AC transfer relay. | $1029.00 | ||||||||
| DR1524E | 1.5 kva 24vdc input 230vac 50Hz output with 35 amp charger and 15 amp AC transfer relay. | $1029.00 | ||||||||
| DR1548E | 1.5 kva 48vdc input 230vac 50Hz output with 15 amp charger and 15 amp AC transfer relay. | $1295.00 | ||||||||
| DR2424E | 2.4 kva 24vdc input 230vac 50Hz output with 70 amp charger and 15 amp AC transfer relay. | $1395.00 | ||||||||
| Japanese Applications | ||||||||||
| DR1512J | 1.5 kva 12vdc input 105vac 50Hz output with 70 amp charger and 30 amp AC transfer relay. | $1029.00 | ||||||||
| DR1524J | 1.5 kva 24vdc input 105vac 50Hz output with 35 amp charger and 30 amp AC transfer relay. | $1029.00 | ||||||||
| DR2424J | 2.4 kva 24vdc input 105vac 50Hz output with 70 amp charger and 30 amp AC transfer relay. | $1395.00 | ||||||||
| DR1512K | 1.5 kva 12vdc input 105vac 60Hz output with 70 amp charger and 30 amp AC transfer relay. | $1029.00 | ||||||||
| DR1524K | 1.5 kva 24vdc input 105vac 60Hz output with 35 amp charger and 30 amp AC transfer relay. | $1029.00 | ||||||||
| DR2424K | 2.4 kva 24vdc input 105vac 60Hz output with 70 amp charger and 30 amp AC transfer relay. | $1395.00 | ||||||||
| Peru and Philippines Applications | ||||||||||
| DR1512W | 1.5 kVA-12 VDC input 220 VAC 60 Hz output with 70 amp charger and 15 amp AC transfer relay | $1029.00 | ||||||||
| DR1524W | 1.5 kVA-24 VDC input 220 VAC 60 Hz output with 35 amp charger and 15 amp AC transfer relay | $1029.00 | ||||||||
| Display | ||||||||||
| DR-D | Display DR Series inverter (non-operational) for showroom (price not discountable) | $95.00 | ||||||||
| DR-Series Accessories | Top | |||||||||
| Model | Description | List Price | ||||||||
| DRI | Stacking interface for two DR inverters, providing 120/240 VAC, 3 wire 240 VAC (doubles output) includes two 1.5' battery cables and the stacking comm. cable (not for use with "E" or "W" models) | $85.00 | ||||||||
| DRCB | Conduit box for all DR's - fits either end - AC/DC (1/2", 3/4" and 2" knockouts), adds 6" (15 cm) | $69.00 | ||||||||
| BTS/15 | Battery Temperature Sensor for DR, SW, PS and UX Series inverters and charge controllers with 15' (5 m) cable (included standard on SW and PS Series) | $29.00 | ||||||||
| BTS/35 | Battery Temperature Sensor with 35' (11 m) cable (included standard on all power panel systems) | $32.00 | ||||||||
| RC8/50 | Remote on/off control with status LED indicator for all DR, PS, TS and UX Series -includes 50' (16 m) cable | $69.00 | ||||||||
| DR-D | Remote on/off control with status LED indicator for all DR, PS, TS and UX Series - includes 100' (30.4 m) cable | $94.00 | ||||||||
| THREE PHASE SW POWER MODULE | Top | |||||||||
Three-phase, commercial scale systems can now enjoy the benefits of the world
famous SW Series. From remote ranches to eco-tourist hotels, this system
delivers all of the features and performance of the SW at continuous power
levels from 9 to 16.5 kW. Excellent for large, hybrid generator systems, each SW
delivers reliable, independent power to each phase, allowing generator
balancing, plus 24-hour power even when the gen-set is off. Generator run time
can be reduced or eliminated by adding a renewable power source such as solar
panels or wind generators. For stand-alone and back up applications. Although
designed for easy installation, we recommend that power system professionals
install all three-phase systems.
|
||||||||||
| Model | Description | List Price | ||||||||
| North American Applications | ||||||||||
| PM-SW5548/3PH | 120 Y 208 VAC 60 Hz 16.5 kVA (5.5 kVA per phase) | $17125.00 | ||||||||
| PM-SW4048/3PH | 120 Y 208 VAC 60Hz 12 kVA (4.0 kVA per phase) | $15457.00 | ||||||||
| European Applications | ||||||||||
| PM-SW4548E/3PH | 230 Y 400 VAC 50 Hz 13.5 kVA (4.5 kVA per phase) | $17125.00 | ||||||||
| PM-SW3048E/3PH | 230 Y 400 VAC 50 Hz 10.0 kVA (3.3 kVA per phase) | $15457.00 | ||||||||
| SW4548E3PH | 4.5 kVA 48 VDC 230 VAC 50 Hz (inverter only, provides single leg of three phase output) | $4095.00 | ||||||||
| SW3048E3PH | SW3048E3PH 3.3 kVA 48 VDC 230 VAC 50 Hz (inverter only, provides single leg of three phase output) | $3595.00 | ||||||||
| SWI/3PH | Three-phase stacking interface cable | $125.00 | ||||||||
| 3025 | Three phase line monitor | $750.00 | ||||||||
| TIGER - TS SERIES | Top | |||||||||
Modified sine-wave inverter with optional 3-stage battery charger & automatic
transfer relay. Designed for small off-grid and utility backup applications.
|
||||||||||
| Model | Description | List Price | ||||||||
| North American Applications | ||||||||||
| TS512SB | 500 VA - 12 VDC input, 120 VAC 60 Hz output with 15 amp charger and 15 amp AC transfer relay | $495.00 | ||||||||
| TS524SB | 500 VA - 24 VDC input, 120 VAC 60 Hz output with 7.5 amp charger and 15 amp AC transfer relay | $495.00 | ||||||||
| TS812SB | 800 VA - 12 VDC input, 120 VAC 60 Hz output with 25 amp charger and 15 amp AC transfer relay | $595.00 | ||||||||
| European Applications | ||||||||||
| TS412ESB | 400 VA - 12 VDC input, 230 VAC 50 Hz output with 15 amp charger and 15 amp AC transfer relay | $495.00 | ||||||||
| TS424ESB | 400 VA - 24 VDC input, 230 VAC 50 Hz output with 7.5 amp charger and 15 amp AC transfer relay | $495.00 | ||||||||
| UX-SERIES | Top | |||||||||
The UX Series is a modified sine wave inverter with an optional 3-stage battery
charger and automatic transfer relay. Simple to operate, this inverter is
designed to fit perfectly into small to medium off grid and utility backup
applications. UL listed.
|
||||||||||
| Model | Description | List Price | ||||||||
| North American Applications | ||||||||||
| UX612 | 600 VA - 12 VDC input 120 VAC 60Hz output | $595.00 | ||||||||
| UX612SB | 600 VA - 12 VDC input 120 VAC 60Hz output with 25 amp charger and 30 amp AC transfer relay | $695.00 | ||||||||
| UX1112 | 1.1 kVA - 12 VDC input, 120 VAC 60 Hz output | $795.00 | ||||||||
| UX1112SB | 1.1 kVA - 12 VDC input, 120 VAC 60 Hz output with 35 amp charger and 30 amp AC transfer relay | $895.00 | ||||||||
| UX1412 | 1.4 kVA - 12 VDC input, 120 VAC 60 Hz output | $885.00 | ||||||||
| UX1412SB | 1.4 kVA - 12 VDC input, 120 VAC 60 Hz output with 50 amp charger and 30 amp AC transfer relay | $985.00 | ||||||||
| European Applications | ||||||||||
| UX512E | 500 VA - 12 VDC input, 230 VAC 50 Hz output | $595.00 | ||||||||
| UX512ESB | 500 VA - 12 VDC input, 230 VAC 50 Hz output with 25 amp charger and 15 amp AC transfer relay | $695.00 | ||||||||
| UX1112E | 1.1 kVA - 12 VDC input, 230 VAC 50 Hz output | $729.00 | ||||||||
| UX1112ESB | 1.1 kVA - 12 VDC input, 230 VAC 50 Hz output with 50 amp charger and 15 amp AC transfer relay | $829.00 | ||||||||
| Display | ||||||||||
| UX-D | Display UX Series inverter (non-operational) for showroom (price not discountable) | $70.00 | ||||||||
| TS & UX ACCESSORIES | Top | |||||||||
| Model | Description | List Price | ||||||||
| BTS/15 | Battery Temperature Sensor for DR, SW, PS and UX Series inverters and charge controllers -15' (5 m) cable | $29.00 | ||||||||
| BTS/35 | Battery Temperature Sensor with 35' (11 m) cable (included standard on all power panel systems) | $32.00 | ||||||||
| RC8/50 | Remote on/off control with status LED indicator for all DR, PS, TS and UX Series - includes 50' (16m) cable | $69.00 | ||||||||
| RC8/100 | Remote on/off control with status LED indicator for all DR, PS, TS and UX Series - includes 100' (30.4 m) cable | $94.00 | ||||||||
| SYSTEM MONITORING | Top | |||||||||
| A battery system monitor is a value for any off grid or backup power installation. Depending on model, you can display volts, amps, amp-hours, battery time remaining, or even battery charging efficiency and average depth of discharge. | ||||||||||
| Model | Description | List Price | ||||||||
| TM500A | Accumulating amp/hr system monitor for 12, 24 and 48* volt DC systems, displays percentage of battery power remaining (comes with 500 amp shunt and 50' cable) | $245.00 | ||||||||
| TM500A - NS | Amp/hr voltage system meter for 12, 24 and 48* volt DC systems, displays percentage of battery power remaining (no shunt - requires 500 amp/50 mv Deltec shunt) | $195.00 | ||||||||
| TM-48 | 48 VDC adapter for TM500A & TM500A-NS | $40.00 | ||||||||
| TC/25 | 25' remote control cable to enable inverter on/off function on your TM500A | $22.00 | ||||||||
| Link 10 Standard | Link 10 with 500 amp shunt in a plastic clamshell** | $250.00 | ||||||||
| Link 10 Choice Features | Link 10 with 500 amp shunt, RS232 serial data output and low battery output in a plastic clamshell | $375.00 | ||||||||
| Link 10 Deluxe Model | Link 10 with 1000 amp shunt, RS232 serial data output, low battery output, electric vehicle option, 1000 amp option and auto range option in a box | $460.00 | ||||||||
| * 48 volt DC systems requires the TM-48 adapter | ||||||||||
| **Call for Link OEM overlays and no shunt options | ||||||||||
| PROSINE SERIES INVERTERS | Top | |||||||||
The PROsine Series offers sine wave inverter output in a compact, lightweight,
high frequency switching design. The PROsine solves load incompatibility at a
value price. Ideal for small systems or as an add-on to existing modified sine
wave installations. Models are available with convenience outlets or with AC
hardwire terminals and integrated transfer relay. All PROsine inverter models
come standard with a built-in backlit LCD display.
|
||||||||||
| Model | Description | List Price | ||||||||
| PROsine 1000 | 1.0 kVA - 12 VDC input, 120 VAC 60Hz output, and dual GFCI convenience outlets | $860.00 | ||||||||
| PROsine 1000 HW/TR | 1.0 kVA - 12 VDC input, 120 VAC 60Hz output, and 15 amp AC transfer relay | $910.00 | ||||||||
| PROsine 1000/24V | 1.0 kVA - 24 VDC input, 120 VAC 60Hz output, and dual GFCI convenience outlets | $950.00 | ||||||||
| PROsine 1000/24V HW/TR | 1.0 kVA - 24 VDC input, 120 VAC 60Hz output, and 15 amp AC transfer relay | $1000.00 | ||||||||
| PROsine 1800 | 1.8 kVA - 12 VDC input, 120 VAC 60Hz output, and dual GFCI convenience outlets | $1250.00 | ||||||||
| PROsine 1800 HW/TR | 1.8 kVA - 12 VDC input, 120 VAC 60Hz output, and 15 amp AC transfer relay | $1300.00 | ||||||||
| PROsine 1800/24V | 1.8 kVA - 24 VDC input, 120 VAC 60Hz output, and dual GFCI convenience outlets | $1380.00 | ||||||||
| PROsine 1800/24V HW/TR | 1.8 kVA - 24 VDC input, 120 VAC 60Hz output, and 15 amp AC transfer relay | $1430.00 | ||||||||
| PROsine 1000i | 1.0 kVA - 12 VDC input, 230 VAC 60Hz output, and a single Schuko convenience outlet | $860.00 | ||||||||
| PROsine 1000i HW/TR | 1.0 kVA - 12 VDC input, 230 VAC 60Hz output, and 10 amp AC transfer relay | $960.00 | ||||||||
| PROsine 1000i/24V | 1.0 kVA - 24 VDC input, 230 VAC 60Hz output, and a single Schuko convenience outlet | $950.00 | ||||||||
| PROsine 1000i/24V HW/TR | 1.0 kVA - 24 VDC input, 230 VAC 60Hz output, and 10 amp AC transfer relay | $1050.00 | ||||||||
| PROsine 1800i | 1.8 kVA - 12 VDC input, 230 VAC 60Hz output, and a single Schuko convenience outlet | $1250.00 | ||||||||
| PROsine 1800i HW/TR | 1.8 kVA - 12 VDC input, 230 VAC 60Hz output, and 10 amp AC transfer relay | $1350.00 | ||||||||
| PROsine 1800i/24V | 1.8 kVA - 24 VDC input, 230 VAC 60Hz output, and a single Schuko convenience outlet | $1370.00 | ||||||||
| PROsine 1800i/24V HW/TR | 1.8 kVA - 24 VDC input, 230 VAC 60Hz output, and a single Schuko convenience outlet | $1470.00 | ||||||||
| PROsine Remote Interface | Allows LCD panel to be removed - includes 25' of cable and replacement on/off switch panel for inverter cavity | $50.00 | ||||||||
| PROSINE SERIES INVERTER/CHARGERS | Top | |||||||||
|
The PROsine Series offers bi-directional sine wave inverter/charger
functionality with all the benefits of a lightweight, high frequency design.
Ideal for backup power and off grid applications where space is a premium. All
PROsine inverter/chargers are CSA listed to UL standards and come packaged with
a user friendly remote display panel.
PROsine 2.0
PROsine 2.5 and 3.0
|
||||||||||
| Model | Description | List Price | ||||||||
| PROsine 2.0 | 2.0 kVA - 12 VDC input, 120 VAC 60Hz output with 100 amp charger, 30 amp AC transfer relay, temp sensor, and remote display panel | $1999.95 | ||||||||
| PROsine 2.5 | 2.5 kVA - 12 VDC input, 120 VAC 60Hz output with 100 amp charger, 30 amp AC transfer relay, temp sensor, and standard remote display panel | $2599.95 | ||||||||
| PROsine 2.5/24V | 2.5 kVA - 24 VDC input, 120 VAC 60Hz output with 100 amp charger, 30 amp AC transfer relay, temp sensor, and standard remote display panel | $2859.95 | ||||||||
| PROsine 3.0 | 3.0 kVA - 12 VDC input, 120 VAC 60Hz output with 120 amp charger, 30 amp AC transfer relay, temp sensor, and Advanced Control System (ACS) panel | $2999.95 | ||||||||
| PROsine 3.0/24V | 3.0 kVA - 24 VDC input, 120 VAC 60Hz output with 60 amp charger, 30 amp AC transfer relay, temp sensor, and Advanced Control System (ACS) panel | $3299.95 | ||||||||
| ACS Remote | Optional LCD Remote for PROsine 2.5, standard with 3.0 | $249.95 | ||||||||
| T240 AUTOTRANSFORMER | Top | |||||||||
| UL Listed step-up/step-down autotransformer or balancing transformer. Includes built-in dual pole 25 amp circuit breaker disconnect. Rated for 3900 watts (3.9 kVA) continuous output. | ||||||||||
| Model | Description | List Price | ||||||||
| T240 | 120-240 volt step-up or step-down transformer, maximum continuous power, 3.9 kVA | $350.00 | ||||||||
| PORTAWATTZ HIGH FREQUENCY SERIES | Top | |||||||||
| The high frequency Portawattz Series is compact, lightweight, and easy to install and operate. These proven, modified sine wave inverters are ideal for a variety of portable and light to medium duty installed applications. All feature point-of-use convenience AC outlets, simplified DC connections, and a variety of DC and AC side protection features. | ||||||||||
| Model | Description | List Price | ||||||||
| Portawattz 150 | 150 VA - 12 VDC input, 120 VAC 60 Hz output, single AC outlet, on / off switch, and DC lighter plug connector | $39.95 | ||||||||
| Portawattz 300 | 300 VA - 12 VDC input, 120 VAC 60 Hz output, dual AC outlets, on / off switch, and DC lighter plug connector | $49.95 | ||||||||
| Portawattz 400 | 400 VA - 12 VDC input, 120 VAC 60 Hz output, dual AC outlets, on / off switch, and DC clip lead connectors | $69.95 | ||||||||
| Portawattz 600 | 600 VA - 12 VDC input, 120 VAC 60 Hz output, three AC outlets, on / off switch, and DC terminals | $109.95 | ||||||||
| Portawattz 700 | 700 VA - 12 VDC input, 120 VAC 60 Hz output, three AC outlets, on / off switch, and DC terminals | $119.95 | ||||||||
| Portawattz 1000 | 1.0 kVA - 12 VDC input, 120 VAC 60 Hz output, three AC outlets, on / off switch, DC terminals, and voltage and current led bar graphs | $269.95 | ||||||||
| Portawattz 1750 | 1.75 kVA - 12 VDC input, 120 VAC 60 Hz output, three AC outlets, on / off switch, DC terminals, and voltage and current led bar graphs | $379.95 | ||||||||
| Portawattz 3000 | 3.0 kVA - 12 VDC input, 120 VAC 60 Hz output, three AC outlets, on / off switch, DC terminals, and voltage and current led bar graphs | $599.95 | ||||||||
| XPOWER ELECTRONIC BACKUP POWER GENERATORS | Top | |||||||||
|
Emergency backup power and convenient mobility sums up the xPower line - the
electronic generator is portable and rechargeable. The xPower features an
integrated, dual outlet, high frequency inverter and AGM battery. It can be used
for a variety of AC and DC loads. Standard accessories include a handy DC
fluorescent light, AC charger, DC to DC charging cable, and accessory case.
xPower 300: Dimensions: 9.4" high (23.9 cm) x 5.7" wide (14.5 cm) x 12.6" deep (32 cm) Unit weight: 17.6 lb (7.98 kg) xPower 600: Dimensions: 11.5" high (29.21 cm) x 15.8" wide (40.13 cm) x 14.8" deep (37.59 cm) Height with handle attached: 35.5" Unit weight: 47 lb (21.32 kg) |
||||||||||
| Model | Description | List Price | ||||||||
| xPower 300 | 300 VA, 120 VAC 60 Hz modified sine wave inverter, 21 amp-hour sealed battery, 500 mA charger | $149.95 | ||||||||
| xPower 600 | 600 VA, 120 VAC 60 Hz modified sine wave inverter, 40 amp-hour sealed battery, 5 amp charger | $279.95 | ||||||||
| MULTI-STAGE BATTERY CHARGERS | Top | |||||||||
| Truecharge battery chargers offer the accuracy of microprocessor controlled, multi-stage charging found on Xantrex's inverter/chargers with the size and weight advantage of a high frequency design. Truecharge features include user selectable battery profiles, temperature compensation, and multiple battery bank output. Ideal for deep cycling and continuous battery backup applications. | ||||||||||
| Model | Description | List Price | ||||||||
| Truecharge 10TB | 10 amps at 12 volts output, 2-bank DC hardwire, 90 to 135 VAC input, flooded and gel charge profile settings, manual temperature compensation | $199.95 | ||||||||
| Truecharge 10 | 10 amps at 12 volts output, 1-bank clip lead, 90 to 135 VAC input, flooded and gel charge profile settings | $269.95 | ||||||||
| Truecharge 20+ | 20 amps at 12 volts output, 3-bank DC hardwire, 90 to 135 VAC input, flooded and gel charge profile settings, manual temperature compensation (automatic with sensor) | $429.95 | ||||||||
| Truecharge 40+ | 40 amps at 12 volts output, 3-bank DC hardwire, 90 to 135 VAC input, flooded and gel charge profile settings, manual temperature compensation (automatic with sensor) | $579.95 | ||||||||
| Temperature Sensor | Remote battery temperature sensor for TC20+/40+ | $29.95 | ||||||||
| TC 20+ Remote Panel | Bar graph LED remote display for TC20+ | $39.95 | ||||||||
| TC 40+ Remote Panel | Bar graph LED remote display for TC40+ | $39.95 | ||||||||
| SOLAR CHARGE CONTROLLERS | Top | |||||||||
| These silent, Pulse Width Modulated, field adjustable controllers work as a solar charge controller or a DC load controller or a diversion controller. Each controller comes with a status LED, electronic over current protection, manual, automatic equalization mode, and adjustable set points. | ||||||||||
| Model | Description | List Price | ||||||||
| C12 | 12 amp, 12 VDC - For use as a solar or load or lighting controller | $110.00 | ||||||||
| C35 | 35 amp, 12 or 24 VDC New, lower price | $119.00 | ||||||||
| C40 | 40 amp, 12, 24 or 48 VDC New, lower price | $159.00 | ||||||||
| C60 | 60 amp, 12 or 24 VDC New, lower price | $199.00 | ||||||||
| CM | Digital meter mounts onto the front of the charge controller - displays volts, amps and cumulative amp hours (re-setable) for a solar array, DC loads or diversion loads (depends on application) (formerly DVM/C40) | $99.00 | ||||||||
| CM/R-50 | Remote display for the C35, C40 or C60 with 50' (15 m) communications cable for remote installation (formerly C40R-50) | $126.00 | ||||||||
| CM/R-100 | Remote display for the C35, C40 or C60 with 100' (31 m) communications cable for remote installation (formerly C40R-100) | $146.00 | ||||||||
| BTS/15 | Battery Temperature Sensor for DR, SW, PS and UX Series inverters, and C12, C35, C40 and C60 solar charge controllers - 15' (5 m) cable | $29.00 | ||||||||
| BTS/35 | Battery Temperature Sensor with 35' (11 m) cable (included standard on Power Panel and Power Module systems) | $32.00 | ||||||||
| DC DISCONNECTS AND OPTIONS | Top | |||||||||
| The DC rated circuit breaker/disconnect with indoor enclosure ensures your installation complies with NEC and other safety standard requirements. Designed to work specifically with Trace SW, PS and DR Series inverters and most solar charge controllers for residential and commercial applications. Optional second inverter breaker grounding/bonding block and circuit breaker allow field customization. ETL Listed. | ||||||||||
| Model | Description | List Price | ||||||||
| DC250 | 250 amp breaker with enclosure. For SW4024, SW5548, PS2212, PS2512, DR3624 and DR2412 (Use #4/0 AWG cable min.) | $329.00 | ||||||||
| DC175 | 175 amp breaker with enclosure. For SW4048, PS2524, DR1512, DR1524 and DR2424 (Use #2/0 AWG cable min.) | $329.00 | ||||||||
| GJ250 | Additional 250 amp breaker (field installable) for a second, stacked or unstacked SW or DR inverter | $195.00 | ||||||||
| GJ175 | Additional 175 amp breaker (field installable) for a second, stacked or unstacked SW or DR inverter | $195.00 | ||||||||
| DCBB | Negative/ground bonding block - connects up to two #4/0 AWG negative cables and various ground system cables | $50.00 | ||||||||
| CD60DC | 60 amp circuit breaker for solar array input disconnect for a C40 (mounts on side of DC250/175) | $39.00 | ||||||||
| CD15 | 15 amp circuit breaker for small DC load - mounts on side knockout of DC disconnect enclosure | $29.00 | ||||||||
| CD20 | 20 amp circuit breaker for small DC load - mounts on side knockout of DC disconnect enclosure | $29.00 | ||||||||
| TCB - PV COMBINER BOX | Top | |||||||||
| Meets the UL requirement for series fusing of PV modules when connected in parallel to form larger arrays. Accommodates 10 PV input circuits fused at up to 15 amps per circuit. Maximum total continuous current rating of the TCB is 80 amps at 12, 24 or 48 VDC. Fuses sold separately. | ||||||||||
| Model | Description | List Price | ||||||||
| TCB6 | PV Combiner Box, 6 fused circuits (fuses not included), 80 amp continuous output rating, NEMA 3R enclosure, CSA listed to CSA and UL standards. | $199.00 | ||||||||
| TCF/100xx | Bulk packed Trace Combiner Box Fuses, packaged 100 fuses per pack | $68.00 | ||||||||
| POWER METERS | Top | |||||||||
| The Trace line of power meters offers tools for the pro solar dealer/installer. Don't guess at system load requirements - measure them. The meters record events on four channels for days or weeks, allowing accurate readings for an entire house or with individual circuits measured separately. The data can be downloaded on site or remotely with the optional modem. Battery or standard wall outlet operation. | ||||||||||
| Model | Description | List Price | ||||||||
| Power Tracer |
Recording poly phase power meter for assisting the professional power system
designer - measures, calculates and records V, A, kVA, kW, VARS, PF, and THD
over time
(current transducers not included) |
$1,240.00 | ||||||||
| CT15 | 15 amp split core current transducer | $110.00 | ||||||||
| CT70 | 70 amp split sore current transducer | $110.00 | ||||||||
| CT150 | 150 amp clamp-on current transducer | $280.00 | ||||||||
| Line Logger | Measures instantaneous volts and watts, then records cumulative kWh for loads operating on standard 120 VAC wall outlets | $370.00 | ||||||||
| BATTERY CABLES | Top | |||||||||
| Pre-cut and crimped, UL Listed cable reduces system installation time, improves system integrity and assures code compliance. These flexible cables are made with ring terminals and color-coded heat shrink. NEC rated in conduit for 230 amp (#4/0 AWG), 175 amp (#2/0 AWG) and in free air for 360 amp (#4/0 AWG) or 265 amp (#2/0 AWG). Cables sold as pairs except BC1.5 models which are sold as single jumpers. | ||||||||||
Code to Battery Cables
|
||||||||||
| Model | Description | List Price | ||||||||
| BC3-2/0 | 3 feet (0.9 m.), red and black heat shrink | $59.00 | ||||||||
| BC5-2/0 | 5 feet (1.5 m.), red and black heat shrink | $79.00 | ||||||||
| BC10-2/0 | 10 feet (3.0 m.), red and black heat shrink | $129.00 | ||||||||
| BC3-4/0 | 3 feet (0.9 m.) red and black heat shrink | $79.00 | ||||||||
| BC5-4/0 | 5 feet (1.5 m.), red and black heat shrink | $105.00 | ||||||||
| BC10-4/0 | 10 feet (3.0 m.), red and black heat shrink | $169.00 | ||||||||
| BC15-4/0 | 15 feet (4.5 m.) red and black heat shrink | $200.00 | ||||||||
| BC1.5B-2/0 | 1.5 foot (0.5 m.) black heat shrink (-) | $18.00 | ||||||||
| BC1.5RB-2/0 | 1.5 foot (0.5 m.) red/black heat shrink (+/-) | $18.00 | ||||||||
| BC1.5R-4/0 | 1.5 foot (0.5 m.) red heat shrink (+) | $22.00 | ||||||||
| BC1.5B-4/0 | 1.5 foot (0.5 m.) black heat shrink (-) | $22.00 | ||||||||
| BC1.5RB-4/0 | 1.5 foot (0.5 m.) red/black heat shrink (+/-) | $22.00 | ||||||||
| GROUND FAULT PROTECTION | ||||||||||
| This UL Listed, ground fault protection device is required for residential photovoltaic rooftop installation on homes in the US. Does not include an enclosure. 100 amp DC max per pole. | ||||||||||
| Model | Description | List Price | ||||||||
| PVGFP1 | One pole for one solar array. | $275.00 | ||||||||
| PVGFP2 | Two pole for two solar sub-arrays. | $325.00 | ||||||||
| PVGFP3 | Three pole for three solar sub-arrays. | $375.00 | ||||||||
| PVGFP4 | Four pole for four solar sub-arrays. | $425.00 | ||||||||
| FUSE BLOCKS AND FUSES | Top | |||||||||
| Model | Description | List Price | ||||||||
| Fuse block with a DC rated, UL listed, high current class-T fuse in a protective holder with a removable cover and set screw lug for bare cables (includes fuse). | ||||||||||
| TFB110C | 110 Amp Class T Fuse with set screw lug | $53.00 | ||||||||
| TFB200C | 200 Amp Class T Fuse with set screw lug | $53.00 | ||||||||
| TFB300C | 300 Amp Class T Fuse with set screw lug | $75.00 | ||||||||
| TFB400C | 400 Amp Class T Fuse with set screw lug | $75.00 | ||||||||
| Fuse block with a DC rated, UL listed, high current class-T fuse in a protective holder with a removable cover and stainless steel studs for cables with ring lugs (includes fuse). | ||||||||||
| TFB110 | 110 Amp Class T Fuse with studs | $53.00 | ||||||||
| TFB200 | 200 Amp Class T Fuse with studs | $53.00 | ||||||||
| TFB300 | 300 Amp Class T Fuse with studs | $75.00 | ||||||||
| TFB400 | 400 Amp Class T Fuse with studs | $75.00 | ||||||||
| Replacement fuses for use with TFB and TFBxxxC fuse blocks. | ||||||||||
| TF110 | 110 Amp Class T replacement fuse | $18.00 | ||||||||
| TF200 | 200 Amp Class T replacement fuse | $18.00 | ||||||||
| TF300 | 300 Amp Class T replacement fuse | $38.00 | ||||||||
| TF400 | 400 Amp Class T replacement fuse | $38.00 | ||||||||
| POWER PANEL SYSTEMS | Top | |||||||||
|
SW Series Power Panels
A complete, pre-assembled electrical system which is factory built and NEC compliant. Power Panels are ETL listed to UL and CSA standards for stand-alone, utility-interactive and backup power applications Sine Wave (SW Series) Power Panels include:
|
||||||||||
| PP-SW4024/S | 4.0 kVA - 24 VDC input, 120 VAC 60 Hz output, single SW4024 inverter, 120 amp charger, internal 60 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker | $4995.00 | ||||||||
| PP-SW4024/D | 8.0 kVA - 24 VDC input, 120/240 VAC 60 Hz output, dual SW4024 inverters, 120 amp X 2 chargers, internal 60 amp X 2 automatic AC transfer relays, external 60 amp X 2 AC input/output/bypass breakers | $8995.00 | ||||||||
| PP-SW4048/S | 4.0 kVA - 48 VDC input, 120 VAC 60 Hz output, single SW4048 inverter, 60 amp charger, internal 60 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker | $5059.00 | ||||||||
| PP-SW4048/D | 8.0 kVA - 48 VDC input, 120/240 VAC 60 Hz output, dual SW4048 inverters, 60 amp X 2 chargers, internal 60 amp X 2 automatic AC transfer relays, external 60 amp X 2 AC input/output/bypass breakers | $9137.00 | ||||||||
| PP-SW5548/S | 5.5 kVA - 48 VDC input, 120 VAC 60 Hz output, single SW5548 inverter, 75 amp charger, internal 60 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker | $5695.00 | ||||||||
| PP-SW5548/D | 11.0 kVA - 48 VDC input, 120/240 VAC 60 Hz output, dual SW5548 inverters, 75 amp X 2 chargers, internal 60 amp X 2 automatic AC transfer relays, external 60 amp X 2 AC input/output/bypass breakers | $9995.00 | ||||||||
|
|
||||||||||
| PP-SW3024E/S | 3.3 kVA - 24 VDC input, 230 VAC 50 Hz output, single SW3024E inverter, 100 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker | $5049.00 | ||||||||
| PP-SW3048E/S | 3.3 kVA - 48 VDC input, 230 VAC 50 Hz output, single SW3048E inverter, 50 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker | $5049.00 | ||||||||
| PP-SW4548E/S | 4.5 kVA - 48 VDC input, 230 VAC 50 Hz output, single SW4548E inverter, 60 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker |
$5695.00 |
||||||||
|
|
||||||||||
| NOTE: Some E version Power Panels are available with dual inverters configured for twice the output at 230 VAC 50 Hz. Call your Trace reseller for more details on these models. | ||||||||||
|
DR Series Power Panels
A complete, pre-assembled electrical system which is factory built and NEC compliant. Power Panels are ETL listed to UL and CSA standards for stand-alone and backup power applications. DR Series Power Panel include:
|
||||||||||
| PP-DR1512/S | 1.5 kVA - 12 VDC input, 120 VAC 60 Hz output, single DR1512 inverter, 70 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker | $1979.00 | ||||||||
| PP-DR1512/D | 3.0 kVA - 12 VDC input, 120/240 VAC 60 Hz output, dual DR1512 inverters, 70 amp X 2 chargers, internal 30 amp X 2 automatic AC transfer relays, external 60 amp X 2 input/output/bypass breakers | $3637.00 | ||||||||
| PP-DR1524/S | 1.5 kVA - 12 VDC input, 120 VAC 60 Hz output, single DR1524 inverter, 35 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker | $1879.00 | ||||||||
| PP-DR1524/D | 3.0 kVA - 12 VDC input, 120/240 VAC 60 Hz output, dual DR1524 inverters, 35 amp X 2 chargers, internal 30 amp automatic transfer relays, external 60 amp X 2 AC input/output/bypass breakers | $3529.00 | ||||||||
| PP-DR2412/S | 2.5 kVA - 12 VDC input, 120 VAC 60 Hz output, single DR2412 inverter, 120 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker | $2295.00 | ||||||||
| PP-DR2412/D | 5.0 kVA - 12 VDC input, 120/240 VAC 60 Hz output, dual DR2412 inverters, 120 amp X 2 chargers, internal 30 amp X 2 automatic AC transfer relays, external 60 amp X 2 input/output/bypass breakers | $4337.00 | ||||||||
| PP-DR2424/S | 2.4 kVA - 24 VDC input, 120 VAC 60 Hz output, single DR2424 inverter, 70 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker | $2295.00 | ||||||||
| PP-DR2424/D | 4.8 kVA - 24 VDC input, 120/240 VAC 60 Hz output, dual DR2424 inverters, 70 amp X 2 chargers, internal 30 amp X 2 automatic AC transfer relays, external 60 amp X 2 AC input/output/bypass breakers | $4337.00 | ||||||||
| PP-DR3624/S | 3.6 kVA - 24 VDC input, 120 VAC 60 Hz output, single DR3624 inverter, 70 amp charger, internal 30 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker | $2529.00 | ||||||||
| PP-DR3624/D | 7.2 kVA - 24 VDC input, 120/240 VAC 60 Hz output, dual DR3624 inverters, 70 amp X 2 chargers, internal 30 amp X 2 automatic AC transfer relays, external 60 amp X 2 input/output/bypass breakers | $4795.00 | ||||||||
|
|
||||||||||
| PP-DR1512E/S | 1.5 kVA - 12 VDC input, 230 VAC 50 Hz output, single DR1512E inverter, 70 amp charger, internal 15 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker | $1979.00 | ||||||||
| PP-DR1524E/S | 1.5 kVA - 24 VDC input, 230 VAC 50 Hz output, single DR1524E inverter, 35 amp charger, internal 15 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker | $1879.00 | ||||||||
| PP-DR2424E/S | 2.4 kVA - 24 VDC input, 230 VAC 50 Hz output, single DR2424E inverter, 70 amp charger, internal 15 amp automatic AC transfer relay, external 60 amp AC input/output/bypass breaker | $2295.00 | ||||||||
|
|
||||||||||
|
Power Panel Options (PPO)
The following items are NOT included standard with Power Panels, they must be ordered in addition to the Power Panel. All options may be installed on SW or DR series Power Panels |
||||||||||
| PPO-C40 | C40 DC charge or load or diversion controller, installed complete with prewired 60 amp DC breaker | $258.00 | ||||||||
| PPO-DVM/C40 | Accumulating amp hour meter with LCD display, installed on the front of the C40 (monitors power flowing through C40) | $99.00 | ||||||||
| PPO-CD15 | 15 amp DC load breaker, pre-wired and installed in the DC disconnect | $59.00 | ||||||||
| PPO-CD20 | 20 amp DC load breaker, pre-wired and installed in the DC disconnect | $59.00 | ||||||||
| PPO-CD60 | 60 amp DC load breaker, pre-wired and installed in the DC disconnect | $59.00 | ||||||||
| PPO-BC5-2/0 | 5 foot (1.5m) 2/0 AWG battery cable pair with ring terminals (battery side only) and 2 foot (.6m) flexible conduit* | $83.00 | ||||||||
| PPO-BC10-2/0 | 10 foot (3m) 20 AWG battery cable pair with ring terminals (battery side only) and 7 foot (2.2m) flexible conduit* | $132.00 | ||||||||
| PPO-BC5-4/0 | 5 foot (1.5m) 4/0 AWG battery cable pair with ring terminals (battery side only) and 2 foot (.6m) flexible conduit* | $115.00 | ||||||||
| PPO-BC10-4/0 | 10 foot (3m) 4/0 AWG battery cable pair with ring terminals (battery side only) and 7 foot (2.2m) flexible conduit* | $182.00 | ||||||||
| PPO-BC15-4/0 | 15 foot (4.5m) 4/0 AWG battery cable pair with ring terminals (battery side only) and 12 foot (3.7m) flexible conduit* | $200.00 | ||||||||
| PPO-SB | Heavy duty plastic shipping container, excellent for making a battery box |
$359.00 |
||||||||
| NOTE: * Flexible conduit is shorter than battery cables to allow for extra cable length inside the battery enclosure and the disconnect switch. All Power Panels are prewired for the installation of the TM500 system monitor. 48 VDC models require the TM48 adaptor. | ||||||||||
Please Note: All prices and specifications are subject to change without notice.
EVENT HORIZON SOLAR & WIND
(269) 795.5285
Event Horizon
Advanced Energy Group authorized dealer
